R2000 Rotator
R2000 Rotator®
The R2000 Rotator uses proven Rotator Technology to provide high uniformity without the riser vibration or splash down associated with impact sprinklers.
The simple, snap-apart design is durable, reliable, and easy to repair and clean. Choose from 15 different plate options to achieve optimal trajectory and throw characteristics. Applications include: under-tree irrigation and environmental control of tree fruit, vine, and tree nut crops — as well as overhead irrigation, cooling, and environmental control in tree, vine, small fruit, and nursery crops.
System Types |
Thread and Connection Options |
|
Permanent set using either PVC pipe |
ACME thread fits 1/2", 3/4" |
Accessories and related products
-
The Acme x MNPT Adapter fits the R5 (with #10616), R10, R10T, R2000, R2000WF, S10, D10, R10TG. Available with 3/8", 1/2" or 3/4" inlet.
-
The Acme PVC Adapter fits the R5 (with #10616), R10, R10T, R2000, R2000WF, S10, D10, R10TG. Available with 1/2", 3/4" or 25 mm inlet.
-
High-Angle Road Guard (#9879) fits the R10/R2000(WF).
-
Low-Angle Road Guard (#9590-030) fits the R10/R2000(WF).
-
R2000 Flush Tool (#9210) is used to allow cleaning and flush the sprinkler without shutting the system down.
-
Feedtube Assembly for the R10T, R2000, R2000LP & R2000WF.
-
Feedtube Assembly for the R10, R10T, R2000, R2000LP & R2000WF.
-
Feedtube Assembly for the R10T, R2000, R2000LP & R2000WF.
-
R2000 Stream Splitter (#9397).
-
The Female Acme 1/2” PVC Spigot (#10352) enables easy attachment to a PVC riser.
-
Threaded Cap for Acme Adapter (#10615).
-
R2000 Secuirty Lock (#10045) helps prevent easy removal and theft of your sprinkler investment.
-
R2000 Protector Coyote Guard ( #10398-001).
-
The R2000 Web Guard (#9895-001) protects the nozzle area from spider web intrusion.
-
R2000 Deflector Cap (#10649) is used to shorten the radius of throw.
-
Cap Removal Tool (#10689) can be used to easily remove the cap assembly on the R2000(WF).
-
The Plate Removal Tool (#9620) removes the plate from the R2000.
-
Pressure Gauge Tap Assembly (#10367).
-
2TN Nozzle Removal Tool (#10634) easily removes the nozzle from R10/R2000(WF).
-
Cow Wash Rotator (#10519-016).
-
Ensure high uniformity and even flow throughout your system and eliminate the effects of pressure gains and losses due to uneven topography or high friction loss.The drain check feature eliminates sprinkler drizzle during shut down and start up. Choose from 20, 30, 35, 40, 45, 50 or 60 PSI (1.4, 2.1, 2.4, 2.8, 3.1, 3.4 or 4.1 BAR) nominal pressures.
-
For systems in which pressure ranges are excessive, the Nelson Mini Regulator provides uniform flow and distribution at each sprinkler through pressure regulation. Ensure high uniformity and even flow throughout your system and eliminate the effects of pressure gains and losses due to uneven topography or high friction loss. Choose from 20, 30, 35, 40, 45, 50 or 60 PSI (1.4, 2.1, 2.4, 2.8, 3.1, 3.4 or 4.1 BAR) nominal pressures.
-
The MDC is a check valve only that opens 2-5 PSI (.14-.35 BAR) below the nominal pressure rating. Available in 20 and 35 PSI (1.4-2.4 BAR) options. Ideal when a check feature only is needed or when it is necessary to operate sprinklers at different pressures that best suit environmental conditions. Perfect for overhead cooling of apples and other crops. The MDC prevents draining of the sytem in between frequent on / off cooling cycles.